By James J. Williams Last Updated: June 08, 2020
- 1 Best Wood Lathe Chuck Reviews & Guide | 2020 New Edition
- 1.1 Top 6 Best Wood Lathe Chuck Review
- 1.1.1 1. NOVA 48232 G3 Reversible Wood Turning Chuck
- 1.1.2 NOVA 48232 G3 Reversible Wood Turning Chuck
- 1.1.3 Pros
- 1.1.4 Cons
- 1.1.5 2. PSI Woodworking CSC3000C Barracuda
- 1.1.6 PSI Woodworking CSC3000C Barracuda
- 1.1.7 Pros
- 1.1.8 Cons
- 1.1.9 3. Teknatool – Nova G3 30th Anniversary Woodturning Chuck Bundle
- 1.1.10 Teknatool – Nova G3 30th Anniversary Woodturning Chuck Bundle
- 1.1.11 Pros
- 1.1.12 Cons
- 1.1.13 4. Delta Industrial 46-461 Reversible Nova G3-D Woodturning Chuck
- 1.1.14 Delta Industrial 46-461 Reversible Nova G3-D Woodturning Chuck
- 1.1.15 Pros
- 1.1.16 Cons
- 1.1.17 5. NOVA 48232 G3 Reversible Wood Turning Chuck
- 1.1.18 NOVA 48232 G3 Reversible Wood Turning Chuck
- 1.1.19 Pros
- 1.1.20 Cons
- 1.1.21 6. Lathe Chuck, 4-Jaw 4″ with Adapter
- 1.1.22 Lathe Chuck, 4-Jaw 4″ with Adapter
- 1.1.23 Pros
- 1.1.24 Cons
- 1.2 How to Use a Lathe Chuck for Easy Bowl Turning
- 1.3 Buying Guide: How to Choose the Best Wood Lathe Chuck for You
- 1.1 Top 6 Best Wood Lathe Chuck Review
- 2 Frequently Asked Questions (FAQ)
Best Wood Lathe Chuck Reviews & Guide | 2020 New Edition
When you work with the wood to turn it into something useful for the people, the wood lathe machine is the most fundamental thing for you. It takes great dedication and patience to work with wood. Just a single misshaped saw or an oddly calibrated scraper can destroy the whole plan. If you fail to turn the wood into the shape you are looking for, the wood will be just a piece to be used in the stove. That’s where a good wood lathe chuck comes to contribute.
To keep the wood at the right place to let you work smoothly, the importance of wood lathe chuck is beyond description. Here in this piece of writing, we are going to review the top 6 best wood lathe chuck reviews for you along with the buying guide and FAQ section. So, let’s start now.
Top 6 Best Wood Lathe Chuck Review
Finding the best wood lathe chuck is not very easy. There are hundreds of wood lathe chuck manufacturers who claim their products to be the best. But, to be honest, very few of them ensure the topmost quality that you need. The 6 wood lathe chuck that we are going to feature and review here have got good ratings and accolades from the real buyers on Amazon. We have chosen these 6 by omitting many ‘average' lathe chucks out there. We hope that you can find the one you are looking for from these 6 top picks. Here you go.
1. NOVA 48232 G3 Reversible Wood Turning Chuck
Author comments: Best Overall
Featuring 4 jaws, NOVA 48232 G3 Reversible Wood Turning Chuck is self-centering and geared chuck. This chuck is designed to be used with NOVA 46000 Comet II Midi Lathe. The reverse lock feature helps it to be locked securely.
Being locked on to the spindle of the lathe, it can perform forward and backward functions without any trouble. It functions the best with NOVA 46000 Comet II Lathe to produce a finished product. Note that you are recommended to use only those accessories for this chuck that are from NOVA.
This chuck comes with 1-Inch8TPI thread. You will also have a fast and comfortable T Bar handle with it. Auto stop, Woodworm screw are some of the features of this great chuck. This chuck also offers copper composite jaw slides and 2-inch jaws.
The powerful tuff lock will let you experience vibration-free and solid performance. It comes with a 2-year replacement warranty. Toll-free customer care is always ready to receive your feedback and complaint if any.
NOVA 48232 G3 Reversible Wood Turning Chuck
2. PSI Woodworking CSC3000C Barracuda
Author comments: Best Choice
PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System comes with an adapter of 3/4x16tpi spindles. Being pre-threaded for 1x8tpi, this chuck has 4 jaws to hold the round and square stock. You will find this chuck very easy to use.
This key operated chuck system is probably one of the best value chucks out there. You just need to make use of one hand to use Barracuda lathe chuck. It comes with a T handle jaw. The tightening key in it just takes one hand to tighten the jaws. You can easily use the other hand for doing handling the work smoothly.
A wide variety of accessories are available on the market for it to buy and use. It is easy to fit all "C" series accessories in it. With this chuck, you can avail of a 3.5" diameter, 1" x 8tpi and case. This is so lightweight that you can easily carry it anywhere you want.
PSI Woodworking CSC3000C Barracuda
3. Teknatool – Nova G3 30th Anniversary Woodturning Chuck Bundle
Author comments: Premium Choice
Brought to you by Teknatool, Nova G3 Chuck Bundle is only 3 lbs. in weight. With a chuck body diameter of 3-3/8" and depth of 1-3/4”, Nova G3 has exceptional gripping power. It has dedicated 1" x 8 TPI thread for smooth woodturning experience. Tuff lock gearing and precise action are further strengthened with forward and reverse functions.
This edition has come with additional jaws and hard-shell carrying case. The reverse lock helps it to be locked securely onto the lathe spindle.
Featuring 4 self-centering jaws, it also features T bar handle, pin jaw sets, standard jaws, screw, jaw slides, and whatever you need. You can find all of these stored in a plastic carrying case.
Teknatool – Nova G3 30th Anniversary Woodturning Chuck Bundle
4. Delta Industrial 46-461 Reversible Nova G3-D Woodturning Chuck
Author comments: Best Pick
Delta Industrial 46-461 Reversible Nova G3-D Woodturning Chuck is one of the coolest you would find out there. Coming with a variety of top-notch features, this one is perfect to do its job. It holds the piece of wood securely to help you do your work without any issues. It comes with auto-stop jaw slides which makes sure that the jaws of the chuck are not widened so much beyond the optimum clamping range. This is something that helps to securely hold the material in the right place.
Anti-Release Spindle lock is another cool feature of DELTA Industrial 46-461 Reversible Nova G3-D. This lock will make sure the chuck will not move unnecessarily when mounted on the lathe at the time of forwarding and reversing the operation of turning. For extra smooth jaw movement, an enhanced jaw gearing feature is added with this model of the chuck. This jaw gearing is also effective for increasing the clamping pressure to ensure maximum material support.
On top of all these, threaded jaws make surface contact with the material possible which is essential for better and secure clamping.
Delta Industrial 46-461 Reversible Nova G3-D Woodturning Chuck
5. NOVA 48232 G3 Reversible Wood Turning Chuck
Author comments: Premium Choice
NOVA 48232 G3 Reversible Wood Turning Chuck comes with a bunch of new features than the previous ones. Having a swing capacity of up to 400mm/16" diameter, this woodturning chuck has 4 jaws with self-centering geared advantage.
The reverse lock feature is here to ensure a better gripping on to the lade spindle at the time of reversing and forwarding task. Adorned by 1" x 8TPI thread, it can be used with any lathe that fits the required specifications. To prevent the jaw slides from going past the chuck body, the auto-stop safety feature is included in this chuck.
When it comes to the making of jaw slides, copper fused steel is used for it. It ensures the hardness and a blend of self-lubricating properties. Moreover, the dovetail profile on jaws has made its jaws one of the best in this industry.
NOVA 48232 G3 Reversible Wood Turning Chuck
6. Lathe Chuck, 4-Jaw 4″ with Adapter
Author comments: Good Choice
Brought to you by Lathe Machine Shop, this lathe chuck is one of the highly-rated wood lathe chucks. Along with offering a competitive price, this chuck comes with great design and quality. It has a diameter of 4" (100 mm). You are at liberty to adjust every jaw as you wish while you work. This flexibility has contributed to its popularity. You can also reverse the jaws if necessary. It comes with an adapter that helps to mount it on a flange of 3” or 80 mm. When it was made, high-quality and hardened steel was used.
Lathe Chuck, 4-Jaw 4″ with Adapter
How to Use a Lathe Chuck for Easy Bowl Turning
Well, until now we have seen some of the good wood lathe chucks out there. Let’s now see how can we use the lathe chuck to make something useful like a bowl. Are you ready? Okay, let’s start.
If you want to have a good bowl turning output, you must have a good quality lathe chuck. For many decades, the craftsmen are using the chucks in the lathe to hold the wood in the right place. The new models of the lathe chucks are not as plain as the ones used before. A blend of new technologies with the old models has brought a new age in the lathe chuck industry. Newer chuck models are much more improved than it was a decade ago.
Why do you Need Chucks for Bowl Turning?
Well, chucks are very useful to use for bowl turning. To be frank, there are two ways to attach bowls on your lathe. One is the glue block method and the other is using a chuck. Though one is not necessarily better than the other, knowing the advantages of both helps to choose the one you need.
If you want to rough out a bowl from greenwood, using a chuck is great for it. After roughing out, you can set the bowl to dry and later on go for finish turning using the chuck. This process takes a short time which makes it possible to process a huge amount of wood before it turns to decay.
What Chuck to Buy for Bowl Turning?
If you want to turn large diameter bowls, you need hard and strong jaws with a large capacity and a heavy-duty chuck. For smaller turnings, you can go for smaller chucks. So, it’s all about the size of the product that you should consider before buying your chuck.
Jaws that can compress into a tenon or expand into a recess are the kind of jaws that you need for bowl turning. Most of the manufacturers have different chucks for spindle size and thread count. It is the spindle size of your lathe that you should consider before buying the chuck.
You should go for one that fits perfectly with the spindle of your lathe. However, if ain any case your spindle size or thread is not usual, you can buy an adapter. You might need $170 for a basic body and one set jaws to buy. It may take up to $300 for a chuck body with several sizes of jaws.
How to prepare the turning
Get a tree or a bunch of wood. Select a medium log. Then, cut the log into a bowl-diameter length. Again cut it apart. You chainsaw or band saw can come to use here. Use a band saw to cut the half-log round. To find the major cracks, check the bowl blank.
If you find any crack in the greenwood, that wood is probably not the one you should use. It is because the crack may widen by the passage of time. Remove the bark before putting the wood into the lathe. Mark the center of both sides of the wood.
Turning the Tenon
It is important to turn a tenon to accept the chuck. You need to use a screw chuck to mount the bowl blank between the center. Drilling a pilot hole is necessary to accept the screw. To determine the maximum diameter of the tenon, measure the opening of the chuck’s jaws. Fastening the wood between the centers is crucial in this respect. You should also make sure that the tailstock is tight enough when you move on.
To start the process, start your lathe with a low RPM speed. It is better if the speed is below 800 RPM. In this way, you can know if the bowl is mounted properly. Then, increase the RPM gradually. Putting the bowl blank between the spindles will start to form the tenon. Do not try to open the chuck beyond their highest capacity. Make sure that the jaws are not too much stuck out from the body of the chuck as it may cause some hazard.
Mounting into the Chuck
At this level, mount the bowl into the chuck. It is important to tighten the jaws for ensuring a secure turning. Start the lathe with low speed and then increase. You can either shape the outside or the inside of the bowl as you like. When it is done, get the wood bowl out from the chuck. Now, its time to dry the bowl and use it. However, if the bowl is very thick and heavy even after the drying, you need to re-turning it again.
Buying Guide: How to Choose the Best Wood Lathe Chuck for You
It is confusing to choose the wood lathe chuck you need. There are many manufacturers and models out there. To make the equation easy, we reviewed the 6 top wood lathe chuck above. We strongly believe that you would like them and find the one you are looking for. However, even if you buy the chucks from somewhere else, you should know the aspects you should look in them to determine whether they are made for you or not. In this part, we are going to illustrate the issues you should not ignore while choosing the chuck for your lathe.
Chuck Size: The size of the chuck is very important. You should choose the chuck as per the size of the lathe. If you do otherwise, you may end up failing to assemble the chuck with a lathe. Note that, many chuck manufacturers design their chucks only to be used with the specific lathe. That's why you should always look at the size of the lathe you have and look if the chuck is available from the same brand.
Jaws: Though there are many chucks with 3 jaws, the lathe chucks that we have reviewed here are mostly of 4 jaws. Chuck jaws can be of different sizes. For mini lathes, small jaws work well and for the bigger lathes, small jaws would not be enough. To turn a vast amount of wood, you should have large jaws with enough power and strength.
Wood Types: All the chuck may not handle the wood of both round and square shapes. If you work with both kinds of wood, you should consider buying the lathe chuck that works smoothly with both kinds of wood without any trouble.
Auto-Stop Jaw Slide Feature: If your chuck has an auto-stop jaw slide feature, it is better for you. It makes sure that your jaws are in the right place and does not go beyond the lathe. It maximizes the security of the process.
Spindle lock and Reverse lock: These two features are good to ensure a better grip and output. It is better if your chuck has at least one of these technologies.
Weight: A lathe chuck is meant to be lightweight. You should find them within 3 to 6 lbs. If they are more lightweight and flexible, they are easy to carry and work with.
Price: The price of lathe chuck may vary from manufacturer to manufacturer due to difference in size and quality. Usually, you can get a lathe chuck within $200 with a pair of jaws. The price may increase if you buy a set of jaws and a chuck of a bigger size.
Handle: To ensure maximum comfort, a comfortable handle has no alternatives. T-bar handles are good to ensure better comfort.
Ease: If you do not love to complicate things, a lathe chuck that is easy to install and use should be your priority to buy.
Final Words: We know how tough it is to find the best chuck that stands apart from the crowd. Keeping the need of our readers in mind, we had researched on the wood lathe chucks and brought to you the best 6 wood lathe chuck review above. We hope that you can find the perfect chuck for your lathe.
Frequently Asked Questions (FAQ)
What is a lathe chuck?
A lathe chuck is a combination of jaws and tools that help to secure the piece of wood into the right place of your lathe.
Can a lathe chuck handle any kind of wood?
Most of the modern wood lathe chucks can work with round and square-shaped wood. However, you should see the specifications and product description of your desired chuck to be sure about the type of wood the chuck can handle.
Which size of the chuck is perfect for my lathe?
It depends on your lathe itself. If you have got a mini lathe, you need to buy the chuck of appropriate size to fit in the lathe. However, most of the manufacturers design their chucks as per the size of their lathes.
What kind of jaw should I buy for my chucks?
Most of the chucks come with a pair of jaws. However, you can also find jaws out to buy from. Most of the chucks come with 4 jaws for smooth operation.
What is the average price of a chuck?
The average chuck price ranges from 150$ to 300$ depending on the size and quality.
What is the approximate weight of a lathe chuck?
A lathe chuck is usually very lightweight and flexible. The average weight of a lathe chuck is 3 to 6 pounds.
What makes a lathe chuck great?
A strongly built lathe chuck with a blend of technologies can take a lathe chuck to a new height. Modern lathe chucks may include spindle lock, auto-stop jaw slides feature, reverse feature and so on.